Eco-Worthy Single Axis Solar Tracker System

ECO-WORTHY Single axis solar tracking system can control the Single-axis linear actuator to make the solar panel to follow the sunlight, Keep the solar panel always face the sunlight. Single-axis solar tracker controller is a basic component for the Single-axis solar tracker system. It can work with 12V linear actuator, and make the solar tracker can substantially improve the amount of power produced by a system by enhancing morning and afternoon performance. Our Single-axis solar tracker with smart weather detector, stop working on cloudy days. Flat the solar panel during nighttime or rainy day. Flat the solar panel in the storm. It is a system which places the solar panels high on a pole and tracks them toward the sun all day. Production from a dual-axis solar tracker will increases annual output by approximately 30% compare to a fixed solar system.

• More power generation: Single-axis tracking mounts maximize efficiency by keeping your solar panels facing the sun at all times. Single-axis tracking mounts can boost the power generation of solar panels by at least 30% compared to traditional fixed solar mounts.
• 270° adjustment: The single-axis tracking mounting system allows light sensors and controllers to work together to push the rods through 270° of angular adjustment so that the solar panels always follow the sun's rotation, absorbing solar energy from the north-southeast and north-west, thus generating more power.
• For different panels: The single-axis tracking racking system is also suitable for different sizes of solar panels. Up to 4 panels can be installed when width of each is less than 22in. Up to 3 panels can be installed when width of each is less than 29.5in. Up to 2 panels can be installed when width of each is less than 44.8in. You can install the board according to the actual needs.
• Stability & installation: Stability of single-axis tracking mounts still deserves your attention. Wind resistance level >L8 and pressure resistance >5400PA are sufficient for most environmental conditions. In addition to , the installation is very easy and requires only 4 simple steps:
  • 1. Use expansion screws to fix the base
  • 2. Connect the A-E rods and actuators to the main pole
  • 3. Installing the Controller
  • 4. Installation of solar panels
• Easy to use: The setup is very easy, you only need to operate the controller to complete the control of the single axis tracking bracket system. SET Button-Automatically track the solar mode, FLAT(M)Button-Automatic flat bracket mode.