Integrarack MultiBallast Modular Solar Panel Racking System
The IR MultiBallast solar panel mounting system is the most simple and versatile option on the market for almost any installation. This modular system is capable of holding any size solar panel on almost any roof with a pitch of 6/12 or less, or it can additionally be mounted on a patio or the ground. With only 4 main components, the MultiBallast can be configured in 0° flat, 5° east / west 'W' configuration, 5° north / south facing, 8° north / south facing, 13° north / south facing, or 20° north / south facing. This system can even reach up to 30° when mounted on a slope. All of these configurations can be mounted with our recommended industrial strength adhesive or ballasted using standard cinder blocks, cap blocks, concrete blocks or bricks. The available wind spoiler slides into the riser component and provides incredible resistance against high wind speeds.
- Five Configurations Offering Sun Angles From 5-30° (5°, 8°, 13°, 20°, 30°)
- Only Four Main Components
- Capable Of Racking Any Size Solar Module On The Ground, Patios & Almost Any Roof Surface
- Can Be Ballasted With Standard Cinder Blocks, Cap Blocks, Concrete Blocks, Or Bricks
- Can Be Mounted With Polyurethane Adhesive If Ballasting Is Not An Option
- Available Wind Spoiler Integrates With The Riser For Incredible Wind Resistance
Exploded View
Components:
Bonding
Bonding Between Rows
For bonding between rows of modules, we offer 8" and 12" IR-B1 Bonding Jumpers that are UL 2703 recognized. The bonding jumpers have small internal bonding barbs and they clamp to the bottom inner flange of the solar modules to provide bonding from row to row.
Included Components:
IR-MultiBallast Base Kit (10 Pack) - Aircraft Grade Aluminum
Part Number: IR-MBMA0093
UPC: 85582600093
Material: Aircraft Grade Aluminum
Finish: Mill
Case of ten MultiBallast bases. This base is the foundation of the MultiBallast system and can be ballasted with any standard concrete block, cap block, or bricks. This universal system can be configured from 0 to 30° in a south facing or east-west orientation, with an optional wind spoiler, and can be installed on any roof with a maximum pitch of 6/12, or even on the ground.
Included Hardware:
- (10) H-Module Mounting Brackets
- (10) M8-1.25x50mm Bolts
- (10) M8-1.25x15mm Bolts
- (20) Rubber Friction Pads
IR MultiBallast Riser Kit (10 Pack) - Aircraft Grade Aluminum
Part Number: IR-MBRA0094
UPC: 85582600094
Material: Aircraft Grade Aluminum
Finish: Mill
Case of ten MultiBallast Risers. The riser slides onto the MultiBallast Base, allowing for higher sun angles in south-facing orientation.
Included Hardware:
- (10) H-Module Mounting Brackets
- (20) M8-1.25x15mm Bolts
IR MultiBallast Wind Spoiler Kit (10 Pack) - Aircraft Grade Aluminum
Part Number: IR-MBSA0095
UPC: 85582600095
Material: Aircraft Grade Aluminum
Finish: Mill
Case of ten MultiBallast Wind Spoilers. This optional wind spoiler slides into the MultiBallast Riser and provides higher wind ratings by converting high winds into downforce on the rear of the system.
Downloads:
- Installation Instructions
- Stamped Engineering and Data Sheets